Remove:– the alternator mounting bolts (1),– the alternator. To access the alternator, remove the accessories belt (see Accessories belt tension section). Note:Never refit a belt once removed, always replace it.
1505 on the belt tension checking point (see illustration below).Ĭheck that the tension value is within the fitting tension tolerance, otherwise readjust it.Īlternator mounting bolt M10 4.4 ±±±± 0.6 daNmĪlternator mounting M8 bolt 2.5 ±±±± 0.5 daNm Rotate the crankshaft three times and check that the measurement is in the fitting tension tolerance.Ī CrankshaftB Coolant pumpC AlternatorD Manual power steering pump Tighten the alternator mounting bolts to torque. Tighten the accessories belt using nut (2) on the alternator bracket.Ĭheck the accessories belt tension using belt tension tester Mot. Position the accessories belt along its drive route. Slacken the accessories belt by moving on the alternator: loosen the alternator mounting bolt, then turn nut (1) until the accessories belt comes out.
To access the accessories belt, remove:– the engine undertray,– the front right-hand wheel,– the right-hand mudguard. ENGINE AND TRANSMISSION ASSEMBLY VALUES AND SETTINGSģ07AENGINE AND TRANSMISSION ASSEMBLY VALUES AND SETTINGS
0 kommentar(er)
